New GMC 32 x 120” Metal Gap Bed Lathe 4-18” Spindle Bore GML-32120

New GMC 32 x 120” Metal Gap Bed Lathe 4-18” Spindle Bore GML-32120

Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor. Free Taper Attachment and SINO DRO installed!
ISO 9001 certified

Large spindle bore 4-1/8”
4-way rapid traverse on Longitudinal and cross ways
All dual inch/metric dials.
solid cast iron machine base
Heavy Duty main motor 15 HP
12 spindle speeds from 25-1,600 rpm
54 kinds of inch threads and metric threads
Threading and feeding rate change by levers
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Tools box with leveling pads
One year warranty for parts
Max. swing over bed
32”
Max. length of workpiece
120”
Max. swing over cross slide
22-7/16”
Max. Swing in gap
40-1/2”
Width of Bed
16”
Effective length in gap to spindle
10”
Effective length in gap to chuck jaws
7”
Spindle bore
4-1/8”, D1-8
Taper of spindle center
MT#5 with1:20 reducing sleeve
Spindle speeds
25-1,600 rpm / 12 steps

Longitudinal feeds
0.0016-0.055 IPR, 60 kinds
Cross feeds
0.0008-0.027 IPR, 60 kinds
Inch threads
80-7/16” TPI, 54kinds
Metric threads
0.45-120 mm, 54 kinds
Module threads
0.25-60 mm, 46 kinds
Diameter pitch threads
60-0.25 DP, 42 kinds
Max. travel of top slide
9-1/8”
Max. travel of cross slide
16-1/2”
Longitudinal rapid traverse
18 ft / min.
Cross rapid traverse
8 ft / min.
Diameter of tailstock quill
3-1/2”
Max. travel of tailstock quill
9-1/4”
Taper of tailstock quill center
M.T. # 5
Max. weight of workpiece
2,000 LBS
4-way tool post size
1” x 1”
Longitudinal leadscrew diameter / pitch
Diameter: 3” Pitch: 2 TPI

Main Motor
15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V
Rapid traverse motor
1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor
1/8 HP,220V/440V, 3 phase, prewired on 220V
Machine weight, approx.
10,650 LBS
Overall dimensions, LxWxH
185” x 48” x 67”
Free SINO DRO, installed
Free Taper turning attachment, , installed
12” 3-jaw chuck with top reversible jaws
16” 4-jaw chuck
20” Face plate
10” drive plate
¾”-7-1/2” steady rest with roller jaws
1”-5” follow rest
Removable gap
4-way tools post
Foot brake
Halogen Work light
coolant system
Full length rear splash
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Toolbox and leveling pads

- 7-1/2” to 15-1/4” large steady rest with roller jaws - CALL FOR PRICE
- ALORIS type QC tool post set # 3900-5160, 6 pcs - CALL FOR PRICE
- Live center for tailstock MT# 5, part# 3900-5005 - CALL FOR PRICE