New GMC 32 x 80” Metal Gap Bed Lathe 4-18” Spindle Bore GML-3280

New GMC 32 x 80” Metal Gap Bed Lathe 4-18” Spindle Bore GML-3280

Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor. Free Taper Attachment and SINO DRO installed!

ISO 9001 certified

Large spindle bore 4-1/8”

4-way rapid traverse on Longitudinal and cross ways

All dual inch/metric dials.

solid cast iron machine base

Heavy Duty main motor 15 HP

12 spindle speeds from 25-1,600 rpm

54 kinds of inch threads and metric threads

Threading and feeding rate change by levers

Spindle is balanced, hardened and precision ground

Spindle is supported at 3-point by high precision bearings

All gears and shafts are hardened and precision ground

Guideways induction hardened and precision ground

Automatic lubrication system in headstock and feed box

Tools box with leveling pads

One year warranty for parts

Max. swing over bed

32”

Max. length of workpiece

80”

Max. swing over cross slide

22-7/16”

Max. Swing in gap

40-1/2”

Width of Bed

16”

Effective length in gap to spindle

10”

Effective length in gap to chuck jaws

7”

Spindle bore

4-1/8” , D1-8

Taper of spindle center

MT#5 with1:20 reducing sleeve

Spindle speeds

25-1,600 rpm / 12 steps

Longitudinal feeds

0.0016-0.055 IPR, 60 kinds

Cross feeds

0.0008-0.027 IPR, 60 kinds

Inch threads

80-7/16”TPI, 54kinds

Metric threads

0.45-120 mm , 54 kinds

Module threads

0.25-60 mm, 46 kinds

Diameter pitch threads

60-0.25 DP , 42 kinds

Max. travel of top slide

9-1/8”

Max. travel of cross slide

16-1/2”

Longitudinal rapid traverse

18 ft / min.

Cross rapid traverse

8 ft / min.

Diameter of tailstock quill

3-1/2”

Max. travel of tailstock quill

6”

Taper of tailstock quill center

M.T. # 5

Max. weight of workpiece

2,000 LBS

4-way tool post size

1” x 1”

Longitudinal leadscrew diameter / pitch

Diameter: 3” Pitch: 2 TPI

Main Motor

15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V

Rapid traverse motor

1/3 HP, 220V/440V, 3 phase, prewired on 220V

Coolant pump motor

1/8 HP,220V/440V, 3 phase, prewired on 220V

Machine weight, approx.

9,350 LBS

Overall dimensions, LxWxH

146” x 48” x 67”

Free SINO DRO, installed

Free Taper turning attachment, , installed

12” 3-jaw chuck with top reversible jaws

16” 4-jaw chuck

20” Face plate

10” drive plate

¾”-7-1/2” steady rest with roller jaws

1”-5” follow rest

Removable gap

4-way tools post

Chuck guard with safety shut off

Foot brake

Halogen Work light

coolant system

Full length rear splash

(2) dead centers and (1) reducing sleeve

Thread chasing dial

Tool box and leveling pads

- 7-1/2” to 15-1/4” large steady rest with roller jaws - CALL FOR PRICE
- ALORIS type QC tool post set # 3900-5160, 6 pcs - CALL FOR PRICE
- Live center for tailstock MT# 5, part# 3900-5005 - CALL FOR PRICE