2020 Lagun MVM-2 Megamill Vertical Mill #6708 #1

2020 Lagun MVM-2 Megamill Vertical Mill #6708 #1

SPECIFICATIONS:

Table:

Table size 50” x 10” (1,270 x 254 mm)

T-slots 3 on 2.5” centers (3 on 64 mm)

T-slot size 5/8” (16 mm)

Maximum weight on table 661 lbs. (300 kg)

Travels:Table travel X-axis, manual/ with power feed 35” / 32” (890 / 810 mm)

(Depending on power feed)

Cross travel, Y axis 16” (406 mm)

Knee travel, Z axis 16” (406 mm)

Ram travel 22.04” (560 mm)

Head:

Main motor 3 HP (2.24 kW)

Mechanical Infinite variable speed with (High-Low) manual settings

(60 HZ) 60 to 4500 RPM. Low (60 to 500 RPM); High (500 to

4500 RPM). (Opt. Electronic Variable Speed- 0 to 4,500)

Head swivel (Left to right) +/- 90°

Head tilt +/- 45°

Distance, spindle to column 6.25” to 28” (159 to 719 mm)

Distance, spindle to table 4 to 20” (100 to 506 mm)

Quill:

Power quill feeds .0015, .003, .006 in./rev (.038;.076;.015mm/rev)

Spindle taper R-8 (Opt. #40 NST)

Quill diameter 3.38” (85.73 mm)

Quill travel 5” (127 mm)

Machine Constructive Dimensions:

Column turret diameter (graduated) 15” (380 mm)

Knee width 13.77” (350 mm)

Knee to column bearing length 31.49” (800 mm)

Saddle & table bearing length 20.07” (510 mm)

Ram & turret bearing length 17.71” (450 mm)

Ram length 32.82” (835 mm)

Physical:

Weight 2,645 lbs. (1,200 kg)

Height 83.46” (2,120 mm)

Width 65.59” (1,666 mm)

Depth 78.11” (1,984 mm)

Power, Dual Voltage Motors 230/440 Volts

EQUIPPED WITH:

Lagun Lightning X, Y, Knee Power Feeds

Newall DP700 Digital Read Out

Variable Speed Head (4,500 RPM Max)

Lower Chip Pan

One Shot Lube